M-Series Skid Steers

from Bobcat Co. - Doosan Infracore

The 7,707-lb. S630 radius lift path and 8,327-lb. S650 vertical lift path skid-steer loaders offer rated operating capacities of 2,180 and 2,690 lbs.

• 74-hp Interim Tier IV engine
• 23-gpm standard auxiliary hydraulic flow at 3,500 psi with optional 30.5-gpm high flow
• 15% to 20% increase in tractive effort
• 12.3-mph maximum travel speed
• Cab-forward design and larger door and windows for improved visibility
• 10% larger cab size with improved pressurization
• Optional Selectable Joystick Controls, two speed and high-flow hydraulics optional

Improved Cutter Drum Design

from Roadtec, Inc.

Roadtec introduces improvements to its line of cold planer cutter drums.

• The drum end ring configuration has been redesigned for better match-cutting and increased tool life; the lacing pattern was adjusted to provide a better texture on the milled surface as well as a more balanced impact when the cutting tools strike the surface; this design has been modified with the goal to provide 3,000 hours of service of the tool base and cutter drum's components manufactured at Roadtec
• The improved pattern the new drum design is capable of producing will enhance bonding of the new asphalt layer to the existing base and can also aid in the longevity and higher smoothness of the pavement because over time and with traffic, a rough milled surface will show through the asphalt on a typical thin lift paving job

Rhino EcoStain

from Rhino Linings

Rhino EcoStain provides surface protection and enhances the look and feel of decorative concrete floors. The product line consists of the Rhino EcoStain Base Coat - a bio-based, non-toxic and environmentally safe product for interior and exterior applications - and the Rhino EcoStain ClearCoats - a two-component, waterborne, polyurethane top coat system that magnifies the look of stained concrete while providing protection. These ClearCoats offer UV, chemical, abrasion and impact resistance.

M-Series Compact Track Loaders

from Bobcat Co. - Doosan Infracore

The 9,015-lb. T630 radius lift path and 9,440-lb. T650 vertical lift path compact track loaders offer rated operating capacities of 2,230 and 2,570 lbs.

• 74-hp Interim Tier IV engine
• 23-gpm standard auxiliary hydraulic flow at 3,500 psi with optional 30.5-gpm high flow
• 15% to 20% increase in tractive effort
• 6.6-mph maximum travel speed
• Cab-forward design and larger door and windows for improved visibility
• 10% larger cab size with improved pressurization
• Optional Roller Suspension system, Selectable Joystick Controls, two speed and high-flow hydraulics

Visual Control Room

from Intergis LLC

With its automated scheduling and routing software, the Visual Control Room (VCR) Solution creates optimal schedules and routes for your vehicles and mobile workers within minutes instead of hours. Based on your work rules, the most appropriate resource is automatically assigned to the right job by matching skill sets, territories, customer requirements and resource costs. The shortest distance is calculated between each stop; workers are given route manifests complete with turn-by-turn driving directions.

BF6615 Paver

from BOMAG Americas

The 20,500-lb. BF6615 self-propelled asphalt paver features the UNIMAT electrically heated, full-width floating screed, which delivers a standard 8- to 15-ft. paving width.

• 99-hp Cummins water-cooled, turbocharged diesel engine with ECO-mode
• Dual vibrators provide 2,500 vpm
• 9-ton hopper capacity
• Working speeds up to 180 fpm
• Crawler-style track drive system undercarriage with bolt-on polyurethane track pads